Platinum cure Silicone Rubber/For Climbing holds Mold Making

Description: 

Topsil Platinum cure silicone rubber is quite suitable for mold making of climbing holds, Compared to tin-cured silicone rubbers, platinum-cured silicone is more resistance to burn and low shrinkage on cure.

Features:

Using tin cure silicone for climbing holds mold making has many advantages:

1.) Very good flow

2.) High tear strength

3.) Long shelf life

4.) Heat resistance for casting resins

5.) Medium hardness

6.) Work well with thixotropic agent

7.) High performance cost value

Data Sheet:   

Operation Method:

By pouring, brushing, available

Instructions:

1. Stir part A and Part B well before use.
2. Weight 1 Part A and Part B using an accurate scale and a clean mixing container
3. Vigorously mix and scrape walls of the container, continue mixing until uniform
4. Place the mixture in a vacuum chamber&degass. If without a chamber, pour the mixture 2-3 inches above the pattern in a this stream.
5. Allow the silicone to cure 2-4 hours and demold with care

Storage:

Store in a cool and dry place 18 months from the date of production.

Warm Tips:

* It should be stored in a dry place in its original sealed container.

* Read the product safety data sheet(MSDS) carefully before using, which can be got from the supplier.