- +86 18923498815
- [email protected]
Two-part silicone gel solutions for cable joints, electrical junction boxes, and cable accessory kits requiring flexible insulation, moisture-sealing protection, and service-friendly access.
For cable accessory manufacturers and OEM packers evaluating silicone materials for joint-box filling and electrical connection protection.
المهلة الزمنية:
3-7 أيام
موك:
100 كجم
عينة:
مجاناً
رمز H.S:
39100000
للوصلات المستقيمة ووصلات الكابلات المتفرعة التي تتطلب العزل، ومانع التسرب والحماية من الرطوبة.
لملء صناديق التوصيلات الكهربائية المعرضة للرطوبة أو التكثيف أو البيئات الخارجية.
لحماية الأطراف والموصلات من الرطوبة والاهتزازات والتلوث.
For manufacturers developing gel-filled cable joint kits, repair kits and OEM electrical accessory products.
The right silicone gel must match the electrical requirements, enclosure design, filling process, and service conditions of your cable accessory.
| Selection Factor | What Buyers Should Verify |
|---|---|
| العزل الكهربائي | Operating voltage, dielectric requirements and applicable testing standards |
| الحماية من الرطوبة | Enclosure design, cable entry sealing and required water-ingress testing |
| Gel Softness & Re-Entry | Target softness, adhesion, removal behavior and performance after aging |
| Flowability & Filling | Gel viscosity, filling depth, narrow gaps and potential trapped air |
| Mixing & Curing | Mix ratio, working time, curing temperature and production method |
| Packaging & Production | Manual filling, automated dispensing, cartridge or kit packaging |
مهم: Final electrical insulation and water-sealing performance should be validated in the completed cable joint or enclosure, not determined from the gel’s properties alone.
| Discription | Data | Control Standard |
|---|---|---|
| Product Grade | TE-30 | / |
| نسبة الخلط | 1:1 | By weight |
| Mixed Viscosity | Approx. 4,500–6,000 mPa·s | Mixed A+B; 23°C |
| وقت العمل | Approx. 8–9 min | 23°C |
| Cure / Handling Time | <15 min | 23°C; end-point definition to follow approved test method |
| Softness / Penetration | Approx. 28 Shore A | After 24 h |
| Electrical Properties | >20 kV/mm | GB/T 1695 |
| Supply Format | 20kg/25kg/200kg/drum | package size |
Mix ratio is grade-specific and must be confirmed by weight or volume in the selected TDS. Requirements for a different ratio should be addressed through grade selection, not by changing the ratio of an existing formulation.
Share your application, enclosure design and filling process. We can review the requirements and recommend a candidate material for testing.
Include your target softness, working time, electrical requirements and estimated production demand where available.
Not all specifications need to be finalized before you contact us.
ما الذي نقدمه
Topsil Silicone can discuss formulation and supply options for:
Share your cable accessory design and production requirements to identify a suitable grade for testing.
This page focuses on silicone gel materials for cable accessory manufacturing and filling applications. Please specify whether your project requires bulk A/B material, pre-measured packs or another packaging format so that we can confirm the appropriate supply scope.
سيتم الحفاظ على سرية معلوماتك بشكل صارم.
هذا هو إيفان، مدير شركة Topsil Silicone. تهانينا على العثور على مورد محترف! يرجى إرسال استفسارك، وسوف نتصل بك في غضون 24 ساعة.
