Find the Right RTV-2 Silicone Grade Before Testing the Wrong One
Not sure which RTV-2 silicone rubber to use for your mold or production process? Tell us your application, casting material, target hardness and current problem. Topsil will help match a suitable tin cure or platinum cure silicone grade for testing.
- Tin Cure & Platinum Cure Options
- Grade Matching Before Sample Testing
- Support for Mold Makers & Distributors
- TDS / MSDS / Sample Support Available
Grade Matching Card
التطبيق
Concrete mold
Casting Material
Cement / GRC
Target Hardness
Shore A 25–30
Current Problem
تمزيق العفن
Recommended Grade
High-tear RTV-2 Silicone
What Do You Need Help With?
I need a suitable RTV-2 silicone grade
For new mold making, resin casting, concrete molds, food molds, rapid prototyping or distributor product selection.
My silicone does not cure properly
Sticky surface, soft areas, incomplete curing or curing failure after mixing.
My mold tears, deforms or has short life
Early tearing, poor demolding, weak mold edges, shrinkage or low mold durability.
I need a stable bulk supplier
For distributors, private label brands or production users looking for a sample-to-bulk supply.
Request RTV-2 Silicone Grade Matching
Send us the basic details below. We will recommend a suitable RTV-2 silicone grade for your testing.
How We Recommend an RTV-2 Silicone Grade
We do not recommend silicone rubber only by hardness. A suitable RTV-2 silicone grade depends on the cure system, viscosity, tear strength, working time, mold size, casting material and demolding difficulty.
| Buyer Need | What We Check | ما أهمية ذلك |
|---|---|---|
| انكماش أقل | Tin cure or platinum cure | Precision molds usually need better dimensional stability. |
| إزالة القوالب أسهل | Hardness + elongation + tear strength | Wrong hardness can damage details or make demolding difficult. |
| Fewer bubbles | Viscosity + working time | High viscosity or short pot life may trap air during mixing, degassing or pouring. |
| Longer mold life | Tear strength + casting material | Concrete, PU resin and deep undercuts usually need stronger mold rubber. |
| Food mold use | Cure system + document support | Selected food-related applications usually require platinum cure options and proper document support. |
| Distributor range selection | Hardness series + packaging + technical documents | Distributors need repeatable grades, clear positioning and stable sample-to-bulk supply. |
Common RTV-2 Silicone Problems We Can Help Diagnose
1. Silicone Does Not Cure
Possible causes: Wrong mixing ratio, poor mixing, low temperature, contaminated tools or platinum cure inhibition. What to send us: Photos, mixing ratio, room temperature, master material, cure system and whether the silicone cures normally in the mixing cup.
2. Too Many Bubbles
Possible causes: High viscosity, fast working time, aggressive mixing or no vacuum degassing. What to send us: Application, mold size, current viscosity, working time and whether vacuum equipment is used.
3. Mold Tears Too Easily
Possible causes: Insufficient tear strength, wrong hardness, sharp undercuts, thin mold walls or harsh demolding. What to send us: Mold photos, casting material, Shore hardness, demolding method and expected mold life.
4. Mold Is Too Soft or Too Hard
Possible causes: Wrong Shore A selection, incorrect ratio, under-curing or unsuitable grade for the mold structure. What to send us: Target hardness, current grade, curing time and application details.
5. Mold Shrinkage or Poor Dimensional Stability
Possible causes: Tin cure system, excessive catalyst, unsuitable grade or curing condition. What to send us: Cure system, catalyst ratio, mold size and precision requirement.
6. Short Mold Life
Possible causes: Abrasive casting material, weak tear strength, poor release, repeated harsh demolding or unsuitable silicone type. What to send us: Casting material, number of castings expected, failure photos and current silicone data.
Tin Cure or Platinum Cure Silicone — Which One Should You Test?
| Choose Tin Cure Silicone When | Choose Platinum Cure Silicone When |
|---|---|
| You need cost-effective general mold making. | You need lower shrinkage. |
| You make resin, gypsum, wax or concrete molds. | You need better dimensional stability. |
| You accept normal shrinkage. | You make precision or detailed molds. |
| You need flexible catalyst adjustment. | You need selected food mold or premium mold applications. |
| You want practical bulk mold rubber. | You want longer library life and higher performance. |
Not sure which one fits your application? Send us your mold details and we will recommend one or two grades for sample testing.
From Grade Matching to Sample Testing and Bulk Supply
1. Send application details
2. Get grade recommendation
3. Receive TDS / MSDS
4. Test sample
5. Adjust grade if needed
6. Move to bulk order or distributor supply
For distributors and private label buyers, we can support different hardness grades, sample packs, 20kg / 25kg / 200kg packaging, technical documents and long-term supply planning.
الأسئلة الشائعة
Can you recommend a silicone grade only by Shore hardness?
No. Shore hardness is important, but we also need to know your application, casting material, mold size, demolding difficulty, cure system and expected mold life.
Why does platinum cure silicone sometimes not cure?
Platinum cure silicone may be inhibited by sulfur, amines, some 3D printing resins, organotin residues, latex gloves, certain coatings or contaminated tools. A small surface test is recommended before full mold making.
Which RTV-2 silicone is better for concrete molds?
Concrete molds usually require good tear strength, suitable hardness and mold support. The best grade depends on mold size, texture depth, demolding difficulty and expected mold life.
Can you help if my current silicone mold tears too fast?
Yes. Please send photos, casting material, current hardness, demolding method and failure details. We can help check whether the issue is related to hardness, tear strength, mold design or silicone grade.
Can you support samples before bulk orders?
Yes. We recommend sample testing before bulk purchase, especially for new applications, precision molds, food mold projects and distributor product line development.
